柴油机喷油泵接头疲劳寿命的有限元分析_刘利军.pdfVIP

32( 2010) 2 Vol. 32( 2010)N o. 2 D ieselEngine , , (, 200129) : 为查找某型柴油机喷油泵接头疲劳失效的原因, 利用有限元软件ANSYS和FE-SAFE相结合 的方 , 开展了表面粗糙度对零件疲劳寿命及疲劳安全系数影响的研究分析, 并与试验结果进行了比 较分析结果表明, 计算结果与试验检测结果较为一致, 零件表面的粗糙度等级对其疲劳寿命的影响 很大, 在设计时应予充分考虑分析结果可为表面设计及加工工艺改进提供参考依据 : 喷油泵; 表面粗糙度; 疲劳寿命; FE-SAFE + : T 42318 4 : A : 1001- 4357(2010)02- 0025- 04 Fatigue L ife FEA on the D iesel Engine Fuel Injection Pum p Join t L iu L ijun, JiaW e,i X ia Q ian (Hudong HeavyMachine Co. LTD, Shanghai200129) Abstrac:t Themethod integrating the finite element softwareANSYSw ithFE-SAFE isused to find out the fa- tigue reason of a certain type diesel fuel injection pump joint. The research of the surface roughnessc influence on thepartsc fatigue life and fatigue safe factors is carried out, which is comparedw ith the expermi ental re- sults. The analysis results show that the calculation results are in accordw ith the test results, and thegradeof surface roughness can sharply affect the fatigue life. The results can be provided as reference for the surface design and process technical mi provement. Keywords: fuel injection pump; surface roughness; fatigue life; FE-SAFE ; , , 1 , , , , [ 1] , 1918 , ANSYS , , , ; , FE-SAFE, , ;