基于PIC单片机的变压器温度控制器硬件设计论文.docVIP

毕业设计（论文） 题 目： 变压器温度控制器硬件系统设计 学 院： 电子信息工程学院 专业名称： 电子信息工程 班级学号： 学生姓名： 指导教师： 二O年月 Design of temperature control system Student name: Class: Supervisor: Abstract: With the development of society, the progress of science and technology, the weakness with strong, with single chip micro data processing systems and industrial production has been applied more and more widely. The design of the transformer temperature control system, the design method and the working principle of temperature control system based on PIC16F690 micro controller as the core of the. This design mainly includes the following modules: temperature acquisition circuit, the temperature display circuit, over temperature alarm circuit, fan circuit, over temperature tripping circuit, keyboard input circuit. Detecting the temperature of the three-phase three temperature sensors on the transformer, the temperature signals into voltage signals are transmitted to the PIC micro-controller, and the micro controller PIC built-in AD conversion into a digital signal, to control the fan working and temperature display; when the transformer temperature super fan working temperature keyboard setting, will the wind the switch will open the fan, if the temperature rose again, the alarm circuit can alarm, when the fan is unable to reduce the temperature of the transformer, the temperature rise to trip circuit set, the transformer will trip stop working. The design of the temperature display and key scan function accomplished byCT1668, CT1668 is a kind of keyboard scanning interface LED drive special circuit, the internal integrated MCU digital interface, data latch, LED high voltage driver, keyboard scanning circuit. The design of the transformer temperature control system design of micro system is relatively simple with strong power of weakness, but con