《12864汉字液晶显示--按键电子时钟程序(具有闪烁.》.docVIP

#include reg52.h#include intrins.h#define uchar unsigned charvoid lcd_ini();void ascii_change(void);void delay();void wri_add(uchar com);void wri_dat(uchar com1);void shan(void);void disp();void tkey(void);sbit cs=P1^7;sbit sid=P1^6;sbit sclk=P1^5;bit flag=1; uchar dat,count,f=1;//f测试哪个单元为当前闪烁状态?? uchar data clock[3]={23,45,12};uchar code clockname[10]={北京时间:};??uchar data num[6]; /*******主程序*************/void main(){lcd_ini();count=10;//机器周期为1us,每次定时50ms,此变量用来控制循环次数,在下面赋值为20,共定时1秒TMOD=0x01;TL0=0XB0;TH0=0X3C;EA=1;ET0=1;IT0=1;EX0=1;TR0=1;while(1){back:ascii_chan