《地下管道试压方案》.docx

OyuTolgoi Project Contract No.: A2MW-10-K320B-SWP003 jiangsuJiangduConcentrator Material Handing and Tailings Construction Group Co.,Ltd. 3210structure Platform in Reclaim construction 江苏江都建设集团有限公司MAY. 15th, 2011 Page  PAGE 3 of  NUMPAGES 27  OyuTolgoi Project Project NO: A2MW Concentrator Material Handling and Tailings选矿厂物料输送及尾矿工程 Rev: 0 The Pressure Test Plane for Underground Pipeline 地下管道试压方案 Jiangsu Jiangdu Construction Group Co., Ltd. 江苏江都建设集团有限公司 MAY. 26, 2011 Introduction编制说明 In order to smoothly control the pipe pressure test we establish this plan which is only for the underground pipeline pressure test of SWP003. 本方案针对SWP003工作包内的地下管道试压编制的方案，为了能够更好的控制管道试压工作，特编制此方案。 Reference编制依据 SP-50-019 Pipeline Inside cleaning SP-50-019 管道内部清洁 SP-50-020 Pipeline Pressure Test SP-50-020 管道试压 GB50235-97 Industrial Pipeline Construction and Acceptance Specifications GB50235-97 工业管道工程施工及验收规范 Fluor Construction Drawings 福陆公司提供的施工图纸 Safety Operation Specification 安全操作规范 General 工程概况 The SWP003 underground pipeline mainly uses HDPE pipe and the total length of it is 48500m. The max diameter is 54″and the total length of it is 815m. The minimum diameter is 3″and the total length of it is 1600m. The longest length of pipe is 34″pipe and the total length of it is 12800m. SWP003地下管道的主要材质为HDPE管道；管道长度共计有48500米，其中最大直径的为54″长度共有815米，最小直径的为3″，长度共有1600米，长度共计最长的管道为34″，共有12800米。 Pipeline Pressure Test Schedule 管道试压一览表 OyuTolgoi Project Contract No.: A2MW-10-K320B-SWP003 jiangsuJiangduConcentrator Material Handing and Tailings Construction Group Co.,Ltd. K320 construction 江苏江都建设集团有限公司 MAY. 15th, 2011 Page  PAGE 10 of  NUMPAGES 27 No.序号Pipeline No. 管线号Materials材质Length 管道长度Sectional Pressure Test分段试压Design Pressure 设计压力(Mpa)Design Temperature设计温度(℃)Test Pressure试验压力(Mpa)Remarks 备注13110-FW-2602-HOF-8-NIHDPE149.511.38232.0723110-FW-7173-HOF-8-NIHDPE11611.38232.0733250-FW-7019-HOF-8-NI