仪表培训Part符号化文件.pptVIP

Draft 1 Draft 2 仪表培训 PART 6 : 符号化- 文件 DISCLAIMER The information contained in this document has been prepared by L’Air Liquide S.A. and/or its controlled subsidiaries (“Air Liquide”), exclusively for their use, and is Air Liquide property. Air Liquide believes the information is current and accurate, but circumstances may warrant additional requirements or procedures. This document is subject to periodic review and users are cautioned to obtain the latest edition. Air Liquide makes no representations or warranties to third parties as to the quality, accuracy or completeness of information contained in this document and EXPRESSLY DISCLAIMS ALL WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. No part of this document may be copied or otherwise shown or disclosed to third parties without the prior consent of Air Liquide. Unauthorized use of this document by any third Party, including Air Liquide contractors and subcontractors, shall be at such Party’s own risk, and Air Liquide assumes no liability in connection with information contained herein. Air Liquide disclaims any liability for any damage suffered by any company or person as a result of or in connection with the use, application or implementation of the information contained herein or any part thereof. The benefit of this disclaimer shall inure to Air Liquide and its affiliates. This document should not be confused with federal, state, provincial, or municipal specifications or regulations, insurance requirements or national safety codes. 仪器符号化 1. PID/PFD/AF中仪表的符号化 1.1 PID的例子 1.2 仪表符号化 1.3 联系符号 1.4 阀门符号 1.5 文字识别 1.6 PID资料的识别 2. 逻辑数据符号 2.1 逻辑模块OU 2.2 逻辑模块 ET 2.3逻辑模块 XOR (或其他) 2.4 DI延时 (初始输出延时） 2.5 DT延时 (输出终止延时） 2.6 输出脉冲 PO (输出脉冲) 2.7 闭锁触发器 2.8 定时器 3. 数控处理模块 3.1 计算模块 3.2 调节模块 3.3 阀值模块 1.1 PID/PFD/AF中的仪器 1.2 仪器符号 1.3 管路符号 1.4 阀门符号 1.5 文字识别 1.6 PID资料的识别 2.1 逻辑模块 OU 2.2 逻辑模块 ET 2.3 逻辑模块 XOR (异或) 2.4 DI延迟 (输出初始延迟) 2.5 DT 延时(