Form8.1InstallationChecklist-Piping.docVIP

Form 8.1 Installation checklist: Piping. Client name: Reference #: Permit(s) #: Completed by: Time: Date: 1. Plumbing piping (stub-out) a. Type b. Diameter in. c. Elevation d. Cleanouts ( Yes ( No e. Connection method to piping f. Flow ( Gravity ( Pressure ( Combination 2. Pipe to first tank (building sewer) a. Type b. Diameter in. c. Total length ft. d. Cleanouts ( Yes ( No i. Method: ( Single direction ( Two directional ii. Number: e. Elevation i. Flow ( Gravity ( Pressure ( Combination ii. Beginning: iii. Entering tank: iv. Slope ( 1” in 8’ ( 1” in 4’ ( Other v. Slope break in pipe ( NA A. Elevation drop in. B. Method of grade adjustment C. Number of grade adjustments D. Cleanout at top of grade adjustment ( f. Insulated ( NA ( Yes, method: g. Pipe cutting i. Method: ( PVC pipe cutter ( Hand saw ( Chop saw ii. Cuts do not compromise diameter ( iii. Cut ends: A. Cut square ( B. Free of ridges ( C. Deburred ( D. Beveled ( h. Embedment method i. Foundation ( NA A. Material: B. Depth: C. Compaction method: ii. Bedding A. Material: B. Depth: C. Compaction method: iii. Haunching A. Material: B. Depth: C. Compaction method: iv. Initial backfill A. Material: B. Depth: C. Compaction method: v. Final backfill A. Material: B. Depth: C. Compaction method: i. Connections i. Method: ( Solvent weld ( Threaded ( Mechanical joints ( Gasket Other: ii. If solvent weld: A. Weather conditions B. Primer used Brand/type: C. Glue Brand/type: