Microforge-Microgrinder.PDFVIP

Microforge-Microgrinder Microforge  MF-900 Microforge  MF-830 Microforge Microgrinders  EG-400 Microgrinder  EG-44 Microgrinder 1 Microforge MF-900 Microforge Multiple functions for making different kinds of microtools. Reflecting Narishiges long practical experience, the MF-900 offers a wide range of functions for making many different kinds of microtools by processing micropipette tips. An easy-to-use manipulator is provided for operating the heater and pipette, and the microscope is operated three- dimensionally with control close to the operators hand. Separate rotation mechanisms for vertical and horizontal movement allow the pipette to be approached at any angle, while a special device in the heater section can form it into any required shape. As well as conventional scales, a protractor to measure angles is provided on the microscope eyepiece. With the heater turned ON/OFF via a foot switch, and the heater section integrated into the microscope body, all control actions are performed easily and precisely close to the operators hand. 2 Microforge Specification Foot Switch