ABoostingMultiFlybackConverterforElectricVehicle.PDFVIP

Research Journal of Applied Sciences, Engineering and Technology 10(10): 2015 ISSN: eISSN: © 2015 Maxwell Scientific Publication Corp. Submitted: February 3, 2015 Accepted: March 1, 2015 Published: August 05, 2015 Research Article A Boosting Multi Flyback Converter for Electric Vehicle Application J. Sangeetha, A. Santhi Mary Antony and D. Ramya Department of EEE, Sathyabama University, Chennai, India Abstract: The Flyback converter belongs to the primary switched converter family, which means there is isolation between input and output. Flyback converters have low number of components compared to other Switched Mode Power Supplies (SMPSs), they also have the advantage that several isolated output voltages can be regulated by one control circuit. This study proposes an efficient and cost effective Multi Flyback topology, an isolated DCDC converter suitable for electric vehicle applications especially driven with induction motor. The converter topology forms a power interface between the battery and the motor and also capable of boosting the voltage from low voltage battery side to high voltage DC link. A Multi Flyback Converter topology implemented by paralleling three individual flyback converters at the battery input side and DC link output side. The topology will share the current across each individual converter and the individual power will be added up at the output side. The scheme incorporates a transformer winding technique which can reduce the leakage inductance of the coupled inductor to a satisfactory limit. Keywords: Boost converte