EditedDraft(Rev.2a)-ANSIASCC63.doc

Draft :American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids Accredited Standards Committee on Electromagnetic Compatibility, C63? accredited by the American National Standards Institute Secretariat Institute of Electrical and Electronic Engineers, Inc. American National Standards Institute ? 1995 IEEE. Reprinted, with permission from the IEEE and Edwin L. Bronaugh (author), from his paper presented at the 1995 IEEE Symposium on EMC in Atlanta, GA. Figure G.2 reprinted with permission from The Telecommunications Industry Association, TIA/EIA/IS-95-A, pp. 5–21, ? 1995. Acknowledgments The Accredited Standards Committee on Electromagnetic Compatibility, C63?, thanks the IEEE and Edwin L. Bronaugh (author) for granting permission to use Helmholtz Coils for Calibration of Probes and Sensors: Limits of Magnetic Field Accuracy and Uniformity, from the 1995 IEEE Symposium on EMC, Atlanta, GA, in Annex F of this standard. Abstract: Uniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth. Keywords: American National Standard, electromagnetic compatibility, hearing aid, hearing aid compatibility (HAC), measurement methods, operational compatibility, personal communications service (PCS), wireless communications device ________________________ The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright ? 2007 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 8 June 2007. Printed in the United States of America. C63 is a trademark of the Accredited Standards Committee on Electromagnetic Compatibility. iDEN is a registered trademark in the U.S. Patent Trademark Office, owned by Motorola, Incorporated. PDF: ISBN 0-7381-5614-0 SS95692 No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, withou