《nastran螺栓、垫圈模拟分析实例(精).》.pdf

SOL 600 Engine Gasket Model Instructions Demonstrated: ! Set up the Model Database ! 3D Model Import from a MSC.Nastran BDF ! Creation of Groups from Element Properties ! Complete the Material Models ! Import of Loading and Unloading Curves Using Fields ! Complete the Gasket Element Properties ! Define the Loads and Boundary Conditions ! Define the Analysis Parameters and Output Requests ! Run the Analysis ! Access and Process the Results 2 SOL 600 Set up the Model Database Before importing the block/gasket/cylinder head model, you first need to create a new MSC.Patran database and define the type of model/analysis you intend to generate. The database contains all of the modeling and analysis information for your model. Setting the new model preferences readies the database and provides you with forms tailored for a SOL 600 analysis. Defining picking preferences up front assigns the manner in which you select objects directly from the graphical viewport. To create a new MSC.Patran database: Step 1: On the File menu, click New. Step 2: In the File Name box, type gasket.db and then click OK. CHAPTER 3 Engine Gasket Model Instructions Step 3: In the Analysis Code list, click MSC.Nastran. Step 4: In the Analysis Type list, click Structural, and then click OK. You now have a new database open with the analysis preferences set for a MSC.Nastran structural analysis. 4 SOL 600 To set the picking preferences: