电子标签RFID蚀刻天线的生产设备过程照片.docVIP

Screen Printing is the first process of antenna production, Favite produces RFID antenna by scree printing conductive ink on PET substrate and then deposit 5-um Cu metal onto the conductive layer by Electro Plating. Favite can also offer pure Ag-ink printing manufacturing service for specific RFID antenna requirement. Alignment Mechanism Unloading To cover ink on Screen Printing Mechanism Type: Roll-to-Roll Inner diameter of reel: 76.2mm (3”) Outer diameter of reel: Max 600mm Reel weight: 250Kg per shaft Substrate: PET 50um Web Width: 650mm Printing Speed: 6M/Min, or 85,000 UPH (4”x1” Antenna) Products: Ag-Ink Antenna, or Antenna Pattern with Conductive Ink for the following Plating Production Process Plating Favite offers plated antenna based on roll-to-roll Electro Plating process, we can offer cu-plating thickness upto 15um to meet all antenna manufacturing services. Unloading Plating Mechanism (side view) Full View from unloading side Plating Mechanism (top view) Full View from loading side Type: Roll-to-Roll Inner diameter of reel: 76.2mm (3”) Outer diameter of reel: Max 600mm Reel weight: 250Kg per shaft Substrate: PET 50um with printed conductive ink Antenna Pattern Web Width: 650mm Plating Thickness: 5um~15um Plating Speed: 9M/Min (based on 5um thickness), or 127,000 UPH (4”x1” Antenna) Products: Antenna with cu-plated thickness of 5um-15um Flip Chip Die Bonding Favite offers inlay production service based on Flip Chip Bonding process, which is the highest yield-rate inlay production process.? By dispensing the anisotropic conductive paste (ACP) on the bonding area of RFID antenna, attaching the RFID chip with flip-chip bonding head, heat-curing the ACP up to 10 seconds, the dry inlay products are produced. Loading Dispensing Head Curing Wafer Holder Bonding Head Full View from unloading side Full View from loading side Tag converting process is last production process for RFID Tags, Favite offers RFID