毕业设计（论文）_基于单片机倒车防撞报警系统设计.docVIP

基于单片机的二维数控实验台的设计与实现 摘要 本设计结合机电一体化课程教学环节需要，设计用单片机作为控制系统的X-Y工作台。通过论述X-Y工作台,阐述了机电一体化设计中的共性和关键技术.以单片机为主体，为核心的系统。主要应用作为控制核心，LED点阵显示芯片相结合的系统。充分发挥了单片机的性能。其优点硬件电路简单，软件功能完善，控制系统可靠，性价比较高等特点，具有一定的使用和参考价值。AT89S51单片机,及27128,6264存储器及8155芯片等硬件组成,在控制系统的硬件上编写一定的程序以实现一定的加工功能.其基本思想是:通过单片机控制使电机运动从而实现工作台的移动。 关键词：X—Y工作台；单片机；机电一体化设计 NC-based single-chip two-dimensional test-bed design and implementation Abstract The combination of mechanical and electrical design aspects of the integration of teaching needs, the design of control systems with single-chip microcomputer as the XY table. XY table through on the design of mechanical structure and control interface circuit design, mechanical-electrical integration on the design of the common and key technologies. Two-dimensional numerical control system based on single-chip based on single-chip microcomputer as the main body, the experimental two-dimensional numerical control system as the core platform. The main application of single-chip microcomputer as control core, LED dot matrix display system chips with a combination of CNC system. Give full play to the single-chip performance. Advantage of simple hardware circuit, software functions, the control system reliable and cost-effective features such as high, with a certain degree of use and reference value. The system design is an open-loop control system, its simple structure, convenient and can realize. Sure. Reduce cost, is the most simple control technology application. It fully utilize the MCU software and hardware function to realize the control of machine tools, Machine processing expanded, accuracy and reliability is further improved. System design is to use 27128,6264，AT89S51 and memory and 8155 chips, hardware composition in the control system of the hardware written procedures to achieve certain processing function. The basic idea is: through the single-chip microcomputer control make motor sports so as to realize the worktable moving. Key words: X-Y table; singlechip;