毕业设计（论文）_多功能电子万年历__125624960.docVIP

毕业论文（设计）题 目： 系部名称： 专业班级：学生姓名： 学 号： 指导教师： 教师职称： Multifunctional material taking integrative design of manipulator Abstract In the modern large-scale manufacturing industry, enterprises pay more attention on the automation degree of the production process in order to enhance the production efficiency, and guarantee the product quality. As an important part of the automation production line, industrial robots are gradually approved and adopted by enterprises. The technique level and the application degree of industrial robots reflect the national level of the industrial automation to some extent, currently, industrial robots mainly undertake the jops of welding, spraying, transporting and stowing etc. , which are usually done repeatedly and take high work strength, and most of these robots work in playback way. In this paper I will design an industrial robot with four DOFs, which is used to carry material for a punch. First I will design the structure of the base, the big arm, the small arm and the end manipulator of the robot, then choose proper drive method and transmission method, building the mechanical structure of the robot. On this foundation, I will design the control system of the robot, including choosing DAQ card, servo control, feedback method and designing electric circuit of the terminal card and control software. Great attention will be paid on the reliability of the control software and the robot safety during running. The aims to realize finally include: servocontrol and brake of the joint, monitoring the movement of each joint in realtime, playback programming and modifying the program online, setting reference point and returning to reference point. Keywords: Robot Playback Servocontrol Automatic Brake 目 录 第1章 绪论……………………………………………………………………… 1 1.1 机器人概述……………………………………………………………… 1 1.2 机器人的历史、现状…………………………………………………… 3 1.3 机器人的发展趋势……………………………………………………… 5 第2章 机器人平台设计及机械手的设计……………………………………… 6 2.1自由度及关节………………………