《models》.pdfVIP

Effective switching mode power supplies common mode noise Title cancellation technique with zero equipotential transformer models Author(s) Chan, YP; Pong, MH; Poon, NK; Liu, CP The 25th Annual IEEE Applied Power Electronics Conference Citation and Exposition (APEC 2010), Palm Springs, CA., 21-25 February 2010. In Proceedings of the 25th APEC, 2010, p. 571-574 Issued Date 2010 URL /10722/129655 IEEE Applied Power Electronics Conference and Exposition Rights Conference Proceedings. Copyright © IEEE. Effective Switching Mode Power Supplies Common Mode Noise Cancellation Technique with Zero Equipotential Transformer Models Yick Po Chan, Man Hay Pong, Ngai Kit Poon and Chui Pong Liu Department of Electrical Engineering, The University of Hong Kong Email: achan@eee.hku.hk Abstract—In this paper a transformer construction technique the passive component alone, the effect of such active is proposed that effectively cut off the Common Mode (CM) filter is not easily modeled and the gain bandwidth is noise voltage passing across the isolated primary and severely limited by the active component. secondary windings. This technique employs the Zero Equipotential Line theory to construct an anti-phase winding. 2) Minimize the parasitic coupling capacitors from the It effectively cuts down CM noise by eliminating the noise primary winding to the secondary winding – It leads to a voltage across the isolated