《PNNL-19912》.pdfVIP

PNNL-19912 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 Forming Limits of Weld Metal in Aluminum Alloys and Advanced High-Strength Steels EV Stephens GJ Grant MT Smith RW Davies October 2010 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor Battelle Memorial Institute, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or Battelle Memorial Institute. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. PACIFIC NORTHWEST NATIONAL LABORATORY operated by BATTELLE for the UNITED STATES DEPARTMENT OF ENERGY under Contract DE-AC0 5- 76RL01830 Printed in the United States of America Available to DOE and DOE contractors from the Office of Scientific a