换流阀设备换相失败故障的暂态分析.pdfVIP

37 卷 6 期 电 网 技 术 Vol. 37 No. 6 20 13 年6 月 Power System Technology Jun. 2013 文章编号：1000-3673 （2013 ）06-1759-05 中图分类号：TM 564 文献标志码：A 学科代码：470 4031 换流阀设备换相失败故障的暂态分析 许韦华，陈争光，汤广福，查鲲鹏 （智能电网研究院，北京市昌平区 102200 ） Analysis on Transient Commutation Failure Fault on Converter Valve XU Weihua, CHEN Zhengguang, TANG Guangfu, ZHA Kunpeng (State Grid Research Institute, Changping District, Beijing 102200, China) ABSTRACT: The fault current caused by commutation failure 如果换相失败后控制不当，还会引发连续的换相失 seriously affects the secure operation of HVDC power 败，最终导致直流系统停运。此外，换相失败故障 transmission system. At present, the attention of the research on 期间输入交流系统的电流也将发生变化，从而引起 the mechanism of transient after the occurrence of 系统潮流方向发生变化，有可能导致交流系统保护 commutation failure is paid to the converter that is regarded as [2] ideal switch, in this paper, utilizing the method based on 误动作 。因此，对换相失败进行研究对电网安全 superposition principle and equivalent analysis the influences 运行至关重要。 of actual valve parameters on fault current are taken into 截至目前，国内外对换相失败故障已做了大量 account, and by means of constructing a PSCAD simulation 的研究工作，但针对换相失败发展过程以及换相 model, in which the 12-pulse converter used in actual converter 失败后的暂态机制研究的很少，尤其是考虑实际 valves is considered, the waveforms from simulation results are compared with the results from theoretical analysis to verify 换流阀的暂态分析更为鲜见。文 [3-4]对引起换 the correctness of theoretical analysis method. 相失败的原因进行了分析；文 [5-6]对换相失败 KEY WORDS: commutation failure ；fault current ；tran