- 5
- 0
- 约2.73万字
- 约 6页
- 2016-03-02 发布于湖北
- 举报
新型注入式多电平电流源型变换器的研制.pdf
38 卷 8 期 电 网 技 术 Vol. 38 No. 8
20 14 年8 月 Power System Technology Aug. 2014
文章编号:1000-3673 (20 14)08-2225-06 中图分类号:TM 72 1 文献标志码:A 学科代码:470 4051
新型注入式多电平电流源型变换器的研制
1a 1b 2
罗振鹏 ,刘永和 ,杨宝峰
1.内蒙古工业大学 a. 能源与动力工程学院,b. 电力学院,内蒙古自治区 呼和浩特市 010080;
2.内蒙古电力科学研究院,内蒙古自治区 呼和浩特市 010020 )
A New Kind of Current Source Converter Physical Model Appliance
1a 1b 2
LUO Zhenpeng , LIU Yonghe , YANG Baofeng
(1. a. College of Energy and Power Engineering, b. Faculty of Eletric Power, Inner Mongolia University of Technology,
Hohhot 0 10080, Inner Mongolia Autonomous Region, China;
2. Inner Mongolia Power Research Institute, Hohhot 010020, Inner Mongolia Autonomous Region, China)
ABSTRACT: The topologicl structure of multi-level inj ection 择电压源变换器。其主要原因是:常规电流源变换
current source converter applied in high power circumstance 器采用PWM 技术开通和切断电流来控制交流电流
and the triggered sequence of vavles are given. Through
幅值,这样开关器件容易出现过电压击穿,同时交
controlling the switching devices connected to multi-tap reactor,
流电源系统和电流源变换器之间需连接一个电容
the multilevel current with certain regularity is generated and
inj ected into conventional 12-phase main bridge converter. The 来存储交流侧电感中能量。大功率场合下需连接的
main switching devices turn on once within one power 吸收电容较大,这样不仅费用昂贵,而且容易引起
frequency period, so the switching frequency is low. Inj ecting 谐振,造成电流源变换器装 可靠性降低。电流源
the current with a certain regularity of waveform into to 型较电压源型变换器的突出优点是电流源能够直
parallelly connected main bridges, not only the harmonic
原创力文档

文档评论(0)