数值解析结合法提高电机磁场后处理计算精度.pdfVIP

27 卷 3 期 中 国 电 机 工 程 学 报 Vol.27 No.3 Jan. 2007 2007 年1 月 Proceedings of the CSEE 2007 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2007) 03-0068-05 中图分类号：TM 153 文献标识码：A 学科分类号：47040 数值解析结合法提高电机磁场后处理计算精度 章跃进，江建中，崔 巍 （上海大学机电与工程自动化学院，上海市闸北区200072 ） Accuracy Enhancement of Post Process of Magnetic Field Computation for Rotational Electric Machines by Numerical-analytical Method ZHANG Yue-jin, JIANG Jian-zhong, CUI Wei (College of Mechatronics Engineering and Automation, Shanghai University, Zhabei District, Shanghai 200072, China) ABSTRACT: The magnetic field in air gap is important for 场的计算是有限元法的核心部分，而前处理的实现 machine performance analysis. But the accurate results of finite 则直接关系到有限元法能否实际应用。因此，前处 element post-process are difficultly obtained due to air gap 理技术研究较为深入，并取得了较成熟的结果。特 mesh grid. There is no any mesh grid in air gap region when the 别对于二维场，在自动剖分的基础上还实现了自适 magnetic field of electric machines is computed by the 应剖分。后处理主要是由节点磁位值计算电机的有 numerical-analytical method so that the rotor can be freely 关参数和性能，对其关注程度不及前处理和场计算。 rotated. The induced EMF and electromagnetic torque including the maximum value of cogging torque can be conveniently 一般而言，如果求解区域的网格剖分疏密合理、网 calculated. The precision of post process is also enhanced. The 格 质良好，有限元计算就能获得较高的精度。但 EMF and cogging torque of a phase-decoupling PMSM with 是，有限元计算得到的是场域中各节点的磁位值， non-uniform air gap are calculated. The calculated EMF 是一组离散数据。由节点磁位值计算电机的参数和 waveform shows good agreement with the measured waveform [1]