五相容错式磁通切换永磁电机及控制.pdfVIP

第35 卷 第5 期 中 国 电 机 工 程 学 报 Vol.35 No.5 Mar.5, 2015 2015 年3 月5 日 Proceedings of the CSEE ©2015 Chin.Soc.for Elec.Eng. 1229 DOI ：10.13334/j.0258-8013.pcsee.2015.05.025 文章编号：0258-8013 (2015) 05-1229-08 中图分类号：TM 351 五相容错式磁通切换永磁电机及其控制 赵文祥，唐建勋，吉敬华，刘国海 (江苏大学电气信息工程学院，江苏省 镇江市 212013) Topology and Control of Five-phase Fault-tolerant Flux-switching Permanent-magnet Motor ZHAO Wenxiang, TANG Jianxun, JI Jinghua, LIU Guohai (School of Electrical and Information Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu Province, China) ABSTRACT: A new five-phase fault-tolerant flux-switching 对反电势和齿槽转矩的影响。在此基础上，研究电机故障时 permanent-magnet (FT-FSPM) motor was proposed, which has 的容错控制策略。运用电路、磁路瞬态联合仿真的方法，对 odd rotor pole number. In order to improve fault tolerance, the 电机的转矩进行计算，并设计加工了FT-FSPM 实验样机， key of the proposed motor topology is to incorporate the design 仿真和实验结果验证了理论分析的正确性。 method of fault-tolerant teeth to provide the desired decoupling 关键词：容错电机；容错控制；磁通切换；永磁电机；奇数 among phases. By using the finite-element method, the 转子极 electromagnetic performances of the proposed 10/19-pole FT-FSPM motor were analyzed, including the magnetic field 0 引言 distribution, flux density, back-EMF, and cogging torque. 高可靠性电机驱动系统对于飞行器、电动汽车 Particularly, the influences of odd rotor pole topology on 而言是非常重要的，容错电机因其良好的带故障运 symmetric back-EMF and low cogging torque were analyzed. Also, the control strategies of the proposed motor under normal 行能力而被广泛关注[