基于系统加速能量的切机控制措施量化的研究.pdfVIP

第 34 卷 第 34 期 中 国 电 机 工 程 学 报 Vol.34 No.34 Dec.5, 2014 6134 2014 年 12 月 5 日 Proceedings of the CSEE ©2014 Chin.Soc.for Elec.Eng. DOI ：10.13334/j.0258-8013.pcsee.2014.34.015 文章编号：0258-8013 (2014) 34-6134-07 中图分类号：TM 712 基于系统加速能量的切机控制措施量化研究 吴为，汤涌，孙华东 ( 中国电力科学研究院，北京市 海淀区 100192) Quantitative Research of Generation Capacity Tripped Based on Acceleration Energy of Power System WU Wei, TANG Yong, SUN Huadong (China Electric Power Research Institute, Haidian District, Beijing 100192, China) ABSTRACT: Estimating the generation capacity to be tripped 0 引言 suitably is a pre-preparation for power system transient 暂态稳定控制是保证电网安全稳定运行的重 stability emergency control. With the equations of motion of a 要手段，暂态功角失稳时，通常对送端系统进行切 generator, this paper defined and analyzed the acceleration energy of power system during the steady state, the fault 机控制以保证系统恢复稳定，合理的切机量是确保 clearing time and the moment of control actions taken, and then 系统恢复稳定的关键。因此，切机控制措施的量化 it indicated that the equal-area criterion was a special case of 研究一直是人们关注的焦点[1-9] 。随着互联电网规模 acceleration energy of power system. Based on the detailed 越来越大，暂态稳定控制逐渐向“实时决策，实时 analysis of acceleration energy of power system, a method to 控制”的方向发展，快速量化方法是实现“实时控 estimate generation critical capacity tripped was presented. 制”的前提。近年来广域测量系统的发展，为实现 Different from the equal-area criterion, this method don’t need 暂态稳定的“实时控制”提供了技术保障。目前已 to calculate the unstable equilibrium points, integral pa