轻质填充墙框架结构抗震性能的振动台试验的研究_黄思凝.pdfVIP

31 9 Vol.31 No.9 2014 9 Sep. 2014 ENGINEERING MECHANICS 182 1000-4750(2014)09-0182-08 1,2 2 2 2 (1. () 266580 2. 150080) 1/4 TU317.1 A doi: 10.6052/j.issn.1000-4750.2013.04.0320 SHAKING TABLE SEISMIC TESTON PERFORMANCE OF FRAME-STRUCTURE WITH LIGHT-WEIGHT INFILLED WALLS 1,2 2 2 2 HUANG Si-ning , GUO Xun , SUN De-zhang , MENG Qing-li (1. College of Pipeline and Civil Engineering, China UniversityPetroleum, Qingdao 266580, China; 2. Institute of Engineering Mechanics China Earthquake Administration, Harbin 150080, China) Abstract: A scaled model of a three-story and two-cross frame structure with light-weight infilled walls was designed under a similarity ratio of 1/4 and then tested on a shaking table under different ground motion levels to explore its aseismic performance. Comparing the mode tested results of non-filled and infilled frame structures, the enhancing effect of infilled walls on the frequency of a frame was studied. By analyzing the failure phenomena of the main structure, the frequency attenuation, stiffness degradation, inter-story drift angles and story amplification factors of infilled walls were investigated during different failure stages. The cooperative process of infilled walls and the frame was discussed as well. The results show that the infilled walls firstly dissipated the seismic energy so that the time of frame cracking tends to be postponed, while the flexible joints between infilled walls and frames failed, creating plastic hinges in the joints of