综合实验室自动化仓库建模与仿真标准版要点分析.docVIP

综合实验室自动化立体仓库 出库建模与仿真 学 院： 机电工程学院 专 业： 年 级： 学生姓名： 学 号： 指导教师： 侯开虎 日 期： 201 年 至201年 摘要： 自动化立体仓库(AS/RS，Automatic Storage and Retrieval System)通常包含自动化储存系统、自动引导车(AGV)系统、轨道车系统、自动输送系统、自动分拣系统、机器人系统等多个子系统，是一个离散的、随机的、动态的、多因素、多目标的复杂系统，其规划、设计、建设和运作管理是复杂的系统分析问题。通过传统的解析方法求解，很难得到最优解，并且求解过程时间长、成本高。由于当前我们的工业工程综合实验室自动化立体仓库及其子系统有待规划、设计和试运行，需要得出其正常运行的基本参数，为此本文将结合Auto CAD与Enterprise Dynamics（简称ED）对综合实验室的自动化立体仓库出库部分建模和仿真，将系统建模和仿真技术充分应用到自动化仓库的规划设计和运行分析中，通过建模和仿真分析来评价系统，提供系统可行性分析，为系统改进提供科学、合理的决策依据。 关键词：自动化立体仓库；Auto CAD；Enterprise Dynamics Abstract: Automated stereoscopic warehouse (AS/RS, Automatic Storage and Retrieval System) usually contains automated Storage System, Automatic guide vehicle (AGV) System, rail car System, Automatic conveyor System, Automatic sorting System, robot systems, such AS multiple subsystems, is a discrete, stochastic, dynamic, multi-factor, multi-objective complex systems, the planning, design, construction and operation management is a complex System analysis problems. Through the traditional analytic method, it is difficult to get the optimal solution, and the solving process long time and high cost. Due to our current comprehensive industrial engineering laboratory automation stereoscopic warehouse and its subsystem to be planning, design and commissioning, need to obtain the basic parameters of the normal operation, this paper will combine Auto CAD and Enterprise Dynamics (ED) warehouse automation part of comprehensive laboratory modeling and simulation, system modeling and simulation technology is applied to the automated warehouse fully the planning design and operation analysis, evaluation system through modeling and simulation analysis, provide the system feasibility analysis, provide scientific and reasonable decision basis for system improvement. Key