110kV智能综合变电站保护与监控系统 毕业设计论文.docVIP

本科生毕业设计说明书（毕业论文） 题 目：110kV智能综合变电站保护 与监控系统 110kV智能综合变电站保护与监控系统 摘 要 Protection and monitoring system for 110kV smart substation Abstract Substation is a important node in the network, it shoulders the transformation of voltage, current’s collection, distribution of electricity, control of power flow and adjust voltage. Smart substation aims to operate reliablly and establish a new mode of micro-electronics technology, information technology and computer technology. With the development of electronic transformer, the space of intelligent high-voltage electrical appliances and high speed network communication technology,could provide smart substation system require higher level of reliability, efficiency and stablity. The smart substation rely protection function relate to equipment selection, configuration and the communication system. Selection of main ratings and calibration, the main functions of internal and external protection of transformer short circuit, over-current and various kinds of abnormal operation.Relay protection is mainly for transformer protection introducing the main transformer protection and reserve protection. Application of communication part mainly introduces the RS-485 serial standards and telecontrol technology, all these need remote communication protocol of intelligent substation, converted into the corresponding information, can be data acquisition system identification. Key words：substation；equipment selection；relay protection；remote control technology 目 录 摘 要 I Abstract II 第一章 引 言 1 1.1 智能变电站的概念 1 1.2 智能变电站建立的背景和意义 1 1.3 智能变电站相关技术的发展 1 1.4 智能变电站的主要作用与功能 2 1.5 智能变电站的一些基本概念 3 1.6 智能变电站的体系构架 3 第二章 智能变电站主要设备选型 4 2.1 变压器的选择 4 2.2 高压断路器和隔离开关的选择 4 2.2.1 110kV断路器选择及校验 5 2.2.2 35kV断路器选择及校验 6 2.2.3 10kV断路器选择及校验 8 2.3 互感器的选择 9 2.3.1 110kV电流互感器的选择 9 2.3.2 35kV电流互感器的选择 10 2.3.3 10kV电流互感器的选择 10 2.3.4 电压互感器的选择 11 第三章 变电站一次部分接线方式 12 3.1 变电站一次部分设计基本要求 12 3.2 110kV变电站主接线部分设计方案 13 3.2.1 110kV侧电气主接线方