LTE基本信令流程教程分析.ppt

课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* 课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* 课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* 课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* 课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* 课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* 课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* 课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* 课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* If the UL Interference Overload Indication IE is received in the LOAD INFORMATION message, it indicates the interference level experienced by the sending eNB on some resource blocks. The receiving eNB may take such information into account when setting its scheduling policy and shall consider the received UL Interference Overload Indication IE value valid until reception of a new LOAD INFORMATION message carrying an update of the same IE. If the UL High Interference Indication IE is received in the LOAD INFORMATION message, it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells for the concerned PRBs. The Target Cell ID IE received within the UL High Interference Information IE group in the LOAD INFORMATION message indicates the cell for which the corresponding UL High Interference Indication is meant. The receiving eNB shall consider the value of the UL High Interference Information IE group valid until reception of a new LOAD INFORMATION message carrying an update. If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION message, it indicates, per PRB, whether downlink transmission power is lower than the value indicated by the RNTP Threshold IE. The receiving eNB may take such information into account when setting its scheduling policy and shall consider the received Relative Narrowband Tx Power (RNTP) IE value valid until reception of a new LOAD INFORMATION message carrying an update. 课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* 课程名称 华为技术有限公司 版权所有 未经许可不得扩散 x-* X2建立 目的 在两个eNB间交换应用层数据信息，从而保证X2接口的正确交互 Main IE 服务小区信息： PhyCID和Ce