8-bit microcontroller with 4k bytes flash.pdf

Features ® • Compatible with MCS 51 Products • 4K Bytes of Reprogrammable Flash Memory – Endurance: 10,000 Write/Erase Cycles • 2.7V to 6V Operating Range • Fully Static Operation: 0 Hz to 24 MHz • Two-level Program Memory Lock • 128 x 8-bit Internal RAM • 15 Programmable I/O Lines • Two 16-bit Timer/Counters 8-bit • Six Interrupt Sources Microcontroller • Programmable Serial UART Channel • Direct LED Drive Outputs with 4K Bytes • On-chip Analog Comparator • Low-power Idle and Power-down Modes Flash • Brown-out Detection • Power-On Reset (POR) • Green (Pb/Halide-free/RoHS Compliant) Packaging AT89C4051 1. Description The AT89C4051 is a low-voltage, high-performance CMOS 8-bit microcontroller with 4K bytes of Flash programmable and erasable read-only memory. The device is man- ufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. By combining a versa- tile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C4051 is a powerful microcontroller which provides a highly-flexible and cost-effective solution to many embedded control applications. The AT89C4051 provides the following standard features: 4K bytes of Flash, 128 bytes of RAM, 15 I/O lines, two 16-bit timer/counters, a five-vector, two-level inter- rupt architecture, a full duplex serial port, a precision analog comparator, on-chip oscillator and clock circuitry. In addition, the AT89C4051 is designed with static logic for operation down to zero frequency and supports two software-selectable power saving modes. The Idle Mode stops th