运动控制卡的设计-本科生毕业设计（论文）.docVIP

摘要本设计了一种将控制应用于系统，该系统以为核心。 设计中采用MAX IIEPM570T144作为控制器，以Verilog HDL作为设计语言，用Quartus仿真软件分别对分频模块、调频模块和滞后模块进行了仿真。 关键字：PLD，FPGA，Quartus ABSTRACT In recent years, with the development of computer technology, microelectronic technology and NC technology, open CNC system has become an important development direction. As part of the open CNC systems important component, motion control card research and development has been given more and more importance. From the point of development trend, based on the CAN bus, CPLD and FPGA as the core processor of the open motion controller is becoming the mainstream. This kind of open motion controller with CPLD or FPGA chip as the core processor of motion controller,with PC as the information processing platform, motion controller in embedded PC plug-in card form, also is the use of PC+ motion controller mode,this model will be PC machine information processing ability and open characteristics and motion controller for trajectory control ability organically together, with information processing ability, high degree of opening, motion trajectory control accuracy, good versatility. The graduation project designs a CPLD control applied in motion control card design system, the system uses MAX IIEPM570T14 as the core.The purpose of the design was to output two paths of pulse waveform, one waveform lag another90 degrees, and can realize the output pulse frequency adjustable. In this design uses the MAX IIEPM570T144 as the controller, using Verilog HDL as a design language, using Quartus simulation software for frequency division module, frequency modulation module and lag module simulation was carried out ，thus control precision stepper motor running. Keywords: motion control card, stemping motor, Verilog, CPLD, FPGA, Quartus毕业设计（论文）原创性声明和使用授权说明 原创性声明 本人郑重承诺：所呈交的毕业设计（论文），是我个人在指导教师的指导下进行的研究工作及取得的成果。尽我所知，除文中特别加以标注和致谢的地方外，不包含其他人或组织已经发表或公布过的研究成果，也不包含我为获得 及其它教育机构的学位或学历而使用过的材料。对本研究提供过帮助和做出过贡献的个人或集体，均已在文中作了明确的说明并表示了谢意。 作 者 签 名：