多功能8位十进制频率计数器的设计__本科毕业设计.docVIP

多功能8位十进制频率计数器的设计 设计题目： 多功能8位十进制计数器的设计 学生学号： 08060311205 学生姓名： 孔 文 尧 专业班级： 电 信 112 指导教师： 邓 茜 摘要 使用VHDL 语言来设计，画出流程图和仿真图，让设计的电路通过硬件仿真，再在下到相关器件上，指导满足要求，能实现电子自动化的过程。使用因此Use c language to design, draw a flowchart and simulation map, so the design of the circuit by hardware emulation, and then next to the relevant device guidance to meet the requirements, to achieve the electronic automated process. Frequency signal obtained by the instrument test with a sine wave, but their well-wave signal must be periodically changed, the machine must be broken and the operation shall not be treated. So this graduation design, not only to make powerful digital frequency meter more powerful, but also allows cost reduction and increase its practical effect. All research institutes, schools, laboratories, workshops and other business organizations are using a lot of digital frequency or its related products. Because of its use, the price is quite low so been widely used and studied. In this been noticed, and simulation can provide better measurement frequency also make experimental results more accurate, he can meet the needs of the digital frequency meter is automatically cleared, of course, but also to meet the requirements of automated functional testing, Now we study the way for him its not just that it is easy to read, but also that I can control precision, it is also very fast hardware. The most important is the digital frequency meter, high-tech equipment in the field of research and development and digital satellite, digital communications applications in other fields have good contributions. [Keywords]: c language simulation frequency meter.  目 录 第一章 绪论 1 1.1 频率计数器的背景 1 1.2 频率计数器的研究意义 1 1.3 毕业设计的大致介绍 1 第二章 数字频率计的基本原理 3 2.1 测量频率的方法 3 2.2 频率计的介绍 3 2.4 时间和频率测量 4 第三章 数字频率计的硬件设计 7 3.1实验原理 7 3.2数字频率计的原理图 9 3.3可编程逻辑器件基本原理 8 第四章 部分模块的设计仿真图 11 4.1部分模块的仿真图 11 4.2主要元件及功能模块说