catia逆向建模范例(油壶).docVIP

Quick Surface Reconstruction Detailed StepsTable of Contents Plastic bottle exercise 3 Step (1): Scans creation 3 Step (2): Curves creation 5 Step (3): Surfaces creation 10 Step (4): Creating the rough model 18 Step (5): Filleting the model 21 Plastic bottle exercise Step (1): Scans creation Load the file exercise_start.CATPart from the indicated directory. Start the Quick Surface Reconstruction workbench. Create a first scan at the symmetry plane: Click on the Planar sections icon Select the tessellation Click on the Flip to XZ button Activate the contextual menu of the plane manipulator Select the Edit option Set the Y coordinates to 0 Click the Close button Check the Grouped into one element option Click on the Apply button Click on the OK button Create a second scan by isoslope computation: Click on the Slope analysis icon Select the tesselation Click on the Flip to X button Set the Filter value to 250 Check the Distinct option Click on the OK button Create a third scan by planar section: Click on the Planar sections icon Select the tessellation Click on the Flip to XY button Activate the contextual menu of the plane manipulator Select the Edit option Set the Z coordinates to 205 Click the Close button Check the Distinct option Click on the Apply button Click on the OK button Create a last scan by planar sections: Click on the Planar sections icon Select the tessellation Click on the Flip to XY button Activate the contextual menu of the plane manipulator Select the Edit option Set the Z coordinates to 0 Click the Close button Check the Distinct option Click on the Apply button Click on the OK button Step (2): Curves creation Before starting the curves creation, create a new open body and name it Curves creation. You can also load the file End_step1.CATPart from the indicated directory Create curves from the scan on the symmetry plane Click on the Curve from scan icon Select the first created scan Set the Accuracy value to 0.5 Set the Degree value t