给水厂设计计算书解读.doc

摘 要 本设计题目是某市以长江水为水源新建100000m3/d城市饮用水供水工程工艺初步设计，原水水质：原水取自长江黄石段，按地表水三类水质设计。整个工程包括取水工程、净水工程和输配水工程三部分，本设计方案的编制范围为城市供水工程场界区内的给水处理工艺设计，只作取水工程、净水工程两部分设计，输配水工程不作要求。净水工程其工艺流程如下： 混凝剂 消毒剂 原水 混合 絮凝池 沉淀池 滤池 清水池 二级泵站 用户 关键词 ：饮用水供水工程，取水工程，净水工程，絮凝池，沉淀池，滤池。 Abstract The subject of this design is preliminary for a 100000m3/d water city drinking water supply project , and the water resource is the Changjiang River. Quality of raw water：raw water is from of the Huangshi segment of the Changjiang River, according to the three water quality of surface water for designing. The engineering includes three parts: water intake works, water purification works, and water transportation-distribution works. The preparation scope of the design is urban water supply project field to the water treatment process , and only for two parts: water intake works, water purification works, water transportation-distribution works is not required. The process of water purification project are as follows： Coagulant resource mix flocculation tank Sedimentation tank filter clear water tank Secondary pump station user disinfectant key words：drinking water supply projecwater intake works, water purification works, flocculation tank，Sedimentation tank, filter. 第一章 设计任务书 1.1 设计题目 某市以长江水为水源新建100000m3/d城市饮用水供水工程工艺初步设计 1.2 设计范围 本方案的编制范围为城市供水工程场界区内的给水处理工艺设计。 1.3 主要设计依据 1.原水水质分析资料及其它项目基础条件等资料； 2. GB 50268-2008给水排水管道工程施工及验收规范 3. GB5749－2006《生活饮用水卫生标准》。 4．CJ/T206-2005《城市供水水质标准》 5．《室外给水设计规范》（GB50013-2006） 6．建筑给排水设计规范GB50015