ST 基于STM32F103RE和MEMSiNEMO评估方案.docxVIP

ST 基于STM32F103RE和MEMS的iNEMO评估方案 ST 公司的STEVAL-MKI062V1 (iNEMO)是基于STM32F103RE和MEMS的iNEMO平台,用来对大多数的惯性,温度和压力传感器的性能进行评估,能对加速度计,磁力计和陀螺仪以及压力和温度传感器的数据进行测量. STM32F103RE是高性能ARM? Cortex?-M3 32位RISC核处理器,工作频率72MHz,高速嵌入存储器(闪存多达512KB,SRAM多达64KB),有多种增强I/O和外设,连接到两个APB总线.本文介绍STM32F103RE主要特性和方框图,以及STEVAL-MKI062V1 (iNEMO?)传感器平台主要特性,电路图和材料清单.iNEMO: iNErtial MOdule demonstration board based on MEMS sensors and the STM32F103REThe STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM? Cortex?-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.The STM32F103xx high-density performance line family operates in the –40 to +105℃ temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F103xx high-density performance line family offers devices in six different package types: from 64 pins to 144 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.These features make the STM32F103xx high-density performance line microcontroller family suitable for a wide range of applications:● Motor drive and application control● Medical and handheld equipment● PC peripherals gaming and GPS platforms● Industrial applications, PLC, inverters, printers, and scanners● Alarm systems, video intercom, and HVACSTM32F103RE主要特性:■ Core: ARM 32-bit Cortex?-M3 CPU– 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0