IBM_V7000安装配置要点.pptVIP

Storwize V7000 存储配置-创建Vdisk | Storwize V7000 存储配置-创建Vdisk | Storwize V7000 存储配置-显示Vdisk | Storwize V7000 存储配置- Spare盘 Spares Configuration Spares is global By default the spare to drive members ratio of same drive class is 1:23 Manual spare setting is allowed Automatic allocation of spares by GUI For every 23* array members with the same drive class on a single chain which are not RAID 0 members, a single spare will be created. Examples: 24 identical drives on a single chain = 1 spare, 23 members 12 identical SSD and 12 identical SAS drives on chain 1 plus 24 identical SAS drives on chain 2 = 1 SSD spare on chain 1, 1 SAS spare on chain 1, 1 SAS spare on chain 2 | | Storwize V7000 Zone配置 Storwize V7000 zone配置- V7000与Host 之间zone配置原则 | Storwize V7000 zone配置- V7000和外部存储zone配置原则 | | Storwize V7000 主机连接 Storwize V7000主机连接- 定义主机 | Storwize V7000主机连接- 定义主机 | Storwize V7000主机连接- Mapping | Storwize V7000主机连接- Mapping | Storwize V7000主机连接- Mapping | * * Storwize V7000主机连接- iSCSI IBM Storwize V7000 supports host access via iSCSI (as an alternative to Fibre Channel) IBM Storwize V7000 uses the built-in Ethernet ports for iSCSI traffic. IBM Storwize V7000 supports the CHAP authentication methods for iSCSI iSCSI IP addresses can be configured for one or more Canister. iSCSI IP addresses can fail over to the partner node Canister if a node Canister fails. This reduces the need for multipathing support in the iSCSI host. * * Storwize V7000主机连接- iSCSI Configure iSCSI IP addresses for one or more Canister node Also configure the iSCSI Simple Name Server (ISNS) address in Storwize V7000 The iSCSI Qualified Name (IQN) for a Storwize V7000 Canister node will be .ibm:2145.cluster_name. Canister_name Because the IQN contains the cluster name and Canister node name – it is important not to change these after iSCSI is deployed. Each Canister can be given an iSCSI alias, as an alternative to the IQN Add th