10.2 如何在Sun工作站上安装3块网卡 10.3 如何在Solaris x86上安装网卡驱动.docVIP

10.2 如何在Sun工作站上安装3块网卡 10.3 如何在Solaris x86上安装网卡驱动 A: Sun Microsystems 2001-01-03如果不想通过ARP表获取MAC地址，就只能通过DLPI实现。此时必须以root身份运行该程序。--------------------------------------------------------------------------/** Usage : program name device name instance number** The program opens the Data Link provider, attaches to the PPA (Physical* Point of Attachment) uses the DL_PHYS_ADDR_REQ DLPI primitive to* request the current physical address which is returned in the* DL_PHYS_ADDR_ACK message. The MAC address is converted to ASCII format* using the ether_ntoa(3N) function and printed.** The program needs to be compiled with the -lsocket -lnsl flags.* # gcc -Wall -pipe -O3 -o ether ether.c -lsocket -lnsl** The output of the program will be as shown below.** # ./ether /dev/hme 0* Mac Address 8:0:20:a8:2e:ac** This program has been tested on SPARC machines running Solaris 2.5.1,* 2.6, 7 and 8 with the /dev/le and /dev/hme interfaces.*/#include stdio.h#include stdlib.h#include fcntl.h#include stropts.h#include sys/types.h#include sys/socket.h#include net/if.h#include netinet/in.h#include netinet/if_ether.h#include sys/errno.h#include unistd.h#include sys/dlpi.h#define MAXDLBUF 256int ppa, fd, flags, errno;long buffer[ MAXDLBUF ];struct strbuf ctl;dl_phys_addr_req_t phys_addr_req;dl_attach_req_t attach_req;dl_phys_addr_ack_t * dlpadd;int main ( int argc, char * argv[] ){ if ( argc != 3 ) { printf( Usage : program name device name instance number\n ); exit( 1 ) ; } if ( geteuid() != 0 ) { printf( Must be root.\n ); exit( 1 ); } if ( ( fd = open( argv[1], O_RDWR, 0 ) ) 0 ) { printf( Open of Device %s failed\n, argv[1] ); exit( 1 ); } ppa = atoi( argv[2] ); attach_req.dl_primitive = DL_ATTACH_REQ; attach_req.dl_ppa = ppa; ctl.maxlen = 0; ctl.len = sizeof( attac