abaqus中实体单元内力提取方法汇总.docVIP

实体单元建的模型，要提取截面的内力有什么好方法呢？我看过别人的一个帖：对于一般的实体单元结构可以定义surface 然后用section file 输出其中，这个surface可以在cae中定义，也可以在inp中定义，但是由于涉及到边的编号问题，所以在inp中容易出错。section file 的结果直接在dat中可见。需要编制小程序将其数据提取。？一定要编个程序才可以提取吗？在dat文件里没有找到什么section file是输出在*.fil文件中。要直接得到截面的total force，moment，heat flux可以在inp中添加：*SECTION PRINT,name=*,surface=**SOF,SOM在dat文件中可以找到总内力和弯矩我做钢筋混凝土的问题，模型分为两个part，分别是钢筋和混凝土，然后Assembe在一起，将钢筋embeded到混凝土内。我在keywords编辑器End assemble前定义*surface, type=cutting surface,name=surface_1-21.5,0,0,1,0,0怎么也不成，总说定义的截面没有相交(坐标计算没有错误)。第三行空着（帮助文档说表示截断整个模型）也不行，写上钢筋或混凝土的单元组名（没有另建组，直接用的keywords编辑器中钢筋或混凝土生成单元的组名）也不行。请问是怎么回事？哪位有相关的例子给我一个，我的QQ还望不吝赐教，谢谢。Displaying a free body cut You can define a free body cut to view the resultant forces and moments transmitted across a selected surface of a model. Force vectors are displayed with a single arrowhead and moment vectors with a double arrowhead. To create a free body cut: To display the entire model in the viewport, select?ToolsDisplay GroupPlotAll?from the main menu bar. From the main menu bar, select?ToolsFree Body CutManager. Click?Create?in the?Free Body Cut Manager. From the dialog box that appears, select?3D element faces?as the?Selection method?and click?Continue. In the?Free Body Cross-Section?dialog box, select?Surfaces?as the?Item?and?Pick from viewport?as theMethod. In the prompt area, set the selection method to?by angle?and accept the default angle. Select the surface, highlighted in?Figure 4–33, to define the free body cut cross-section. From the?Selection?toolbar, toggle off the?Select the Entity Closest to the Screen?tool??and ensure that the?Select From All Entities?tool??is selected. As you move the cursor in the viewport, Abaqus/CAE highlights all of the potential selections and adds ellipsis marks (...) next to the cursor arrow to indicate an ambiguous selection. Position the cursor so that one of the faces of the desired surface is highlighted, and click to display the first surface selection. Figure 4–33?Selected