重庆科创职笛г貉白柿峡釬lash动画设计第6课(2学时)Flash基本造型工具的使用.docVIP

重庆科创职业学院授课方案（教案） 课 名： Flash动画设计 教 师： 陈茂涛 班 级： 编写时间： 课题: Flash基本造型工具的使用方法 授课时数 2 教学目的及要求: 掌握二维动画软件（矢量图动画制作合成软件Flash 的使用基本原理讲解 1、Flash软件基本造型工具 旁批栏： 教学情景设计：《人物动画局部》制作。 步骤1：将电脑里图片导入flash（按快捷键Ctrl+R就可以了文件菜单里也有‘输入’）放在Layer1，再新建一层，把Layer1锁定，在Layer2里绘制，线条选一种鲜明一点的颜色，通常用鲜红色或蓝色。绘制时，可以用直线，按图片线条画直线，最好各个部位放在不同层里，这样好修改头发放在另一层Layer3里。最好把每一层都改一下名字，整理 步骤3：完成后，把直线拉弯眼睛放在另一层 步骤4：然后全选，点击属性面板上铅笔后的下拉菜单，选hairline最细的线，使线条变细一点！ 步骤5：完成后，把阴影这一层全部选中，剪切到Layer2，也就是我们画好的人物这一层！千万不要取消选择，就是不要点其它地方取消选择，保持蚂蚁线的样子 pump speed (c) is proportional. A, a party; B, the second party; C/third party. ... A, increasing amplitude increases with the increasing speed of b, the amplitude is independent of load amplitude decreases with the increase of load c, d, amplitude increases as the load when the static friction occurs when the turbo-generator shaft (b). A vibration phase angle is constant b changes, vibration phase angle is c, sometimes constant vibration phase angle and sometimes d, vibration phase angle start, later increased the load on the turbine swing value to a slow rate of speed control system (a). Inversely proportional to the proportional to a, b, c, a nonlinear relationship between d, independent of when the rotor critical speed lower than the speed (d) only when the oil film oscillation may occur. A, 4/5 b, 3/4 c, 2/3 d, at the sliding-parameter shutdown of 1/2, (c) steam turbine overspeed test. A, b, c after taking safety measures, no d, lead on sliding-parameter shutdown process and after approval ratings down compared with (b). Capacity positive differential expansion of b, a, prone to the negative expand difference c, differential expansion does not change d, change little differential expansion turbine shutdown when the coastdown speed, due to the blast and Poissons effect, the rotor will appear (a) sudden increase. A, positive differential expansion of b, negative differential expansion of c, d, differ