日本钢铁标准(JI steel standards).doc

日本钢铁标准(JIS steel standards) 编号 中文名称日本語標題 英文名称 JIS A5015-1992 筑路用钢铁炉渣道路用鉄鋼スラグ Iron and steel slag for road construction JIS B1047-2006 耐腐蚀不锈钢紧固件的钝化处理耐食ステンレス鋼製締結用部品の不動態化 Passivation of corrosion-resistant stainless-steel fasteners JIS B1053-1999 用碳钢和合金钢制成的紧固件的机械特性.第5部分：不低于拉伸强度的紧固螺钉和类似螺纹紧固件炭素鋼及び合金鋼製締結用部品の機械的性質　―　第５部：引張力を受けない止めねじ及び類似のねじ部品 Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses JIS B1054-1-2001 耐腐蚀不锈钢紧固件的机械性能.第1部分:螺栓、螺钉和螺柱 Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 1: Bolts, screws and studs JIS B1054-2-2001 耐腐蚀不锈钢紧固件的机械特性.第2部分:螺母 Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 2: Nuts JIS B1054-3-2001 耐腐蚀不锈钢紧固件的机械特性.第3部分:无拉伸应力的定位螺钉和类似紧固件 Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress JIS B1054-4-2006 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉 Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 4: Tapping screws JIS B1056-2000 普通扭矩型钢六角头螺母.机械和使用性能 Prevailing torque type steel hexagon nuts -- Mechanical and performance properties JIS B2308-2002 不锈钢制带螺纹的管接头 Stainless steel threaded fittings JIS B6911-1999 钢铁的正火与退火工艺鉄鋼の焼ならし及び焼なまし加工 Process of normalizing and annealing of iron and steel JIS B6912-2002 钢铁的感应淬火和回火处理鉄鋼の高周波焼入焼戻し加工 Process of induction hardening and tempering of iron and steel JIS B6913-1999 钢铁的淬火和回火工艺鉄鋼の焼入焼戻し加工 Process of quenching and tempering of iron and steel JIS B6914-2002 钢铁的碳化、氰化、淬火和回火处理鉄鋼の浸炭及び浸炭窒化焼入焼戻し加工 Process of carburizing and carbonitriding, quenching and tempering of iron and steel JIS B6915-1999 钢铁的渗氮和碳氮共渗工艺鉄鋼の窒化及び軟窒化加工 Process of nitriding and nitrocarburizing of iron and steel JIS E1110-1998 碳钢垫板炭素鋼製タイプレート Carbon steel tie-plates JIS E4047-2008 铁路车辆用钢材的电弧焊接头设计方法鉄道車両―旅客車用構体―溶接継手設計方法 Rolling stock -