基于STM32的多功能数控直流电源绪论.docxVIP

PAGE29 / 27 题 目： 多功能数控直流电源 队 员： 队 员： 队 员： 指导教师 ： 完成时间： 2015/7/26 摘要：利用STM32单片机系统，对键盘或者触摸屏输入的数据进行读取。根据模式的设定，可以利用内部的DAC以及外部电路实现数控直流电源输出，分为稳压源、稳流源两种。同时也可以实现模式可调的信号发生器，可以在方波、三角波、锯齿波以及正弦波之间进行切换。 关键词：STM32，数控，直流电源，信号发生器 Abstract：Using STM32 MCU, read the input data from keyboard or touch screen. According to the mode set now, the DAC inside cooperates with outside circuits can output DC power supply, which can be set to two modes, name as voltage source and current source. The same time, it can also work as an signal generator, which can be changed between square wave, triangle wave, saw tooth wave and sine wave. Keyword：STM32, numerical control, DC power supply, signal generator 目录  HYPERLINK \l 设计任务与要求 设计任务与要求····························································3  HYPERLINK \l 设计任务 1.1 设计任务·····························································3  HYPERLINK \l 设计要求 1.2 设计要求·····························································3 2.  HYPERLINK \l 方案论证 方案论证··································································3  HYPERLINK \l 总体设计 2.1 总体设计·····························································3  HYPERLINK \l 关键问题 2.2 关键问题·····························································4 3.  HYPERLINK \l 单元电路设计 单元电路设计······························································9  HYPERLINK \l 总体电路图 3.1 总体电路图···························································9  HYPERLINK \l 参数计算 3.2 参数计算····························································10 4.  HYPERLINK \l 软件设计 软件设计·································································12  HYPERLINK \l 主程序 4.1 主程序······························································12  HYPERLINK \l 关键子程序 4.2 关键子程序···················