空气压缩机机身铣三斜面专用机床夹紧系统、液压系统机械CAD图纸设计.doc

毕 业 设 计论 文 任 务 书 一、题目及专题： 题目　　 　、专题　 　 二、课题来源及选题依据 三、本设计（论文或其他）应达到的要求： 2、部件内零件图纸 （图纸总量折合不少于3张0号图纸） 3、设计说明书一份 （字数不少于10000字） 4、专业英语翻译 （不少于10000字符） 四、接受任务学生： 五、开始及完成日期： 自20年月日 至201年5月2日 六、设计（论文）指导（或顾问）： 指导教师　　　　　　　签名 签名 　　　　　　　签名 教研室主任 　　　　　　〔学科组组长研究所所长〕　　　　　　　签名 　　 　　系主任 　　　　　　签名 20年1月日摘 要关键词：Abstract Special combined machine tool is a mechanical device for universal, applicable to mass production, is quite flexible, high machining accuracy, improve production efficiency, reduce labor intensity. This paper is the design requirement of social production. According to the relevant data of the existing air compressor machine, machining process air compressor airframe design, fixture design, combination milling body three inclined planes of the hydraulic system. On the basis of this new processing technology is proposed and in line with the new technology of special machine tool for processing scheme, make improvement and innovation of the products more suitable for factories and customer needs. Based on the combination of the three bevel milling fixture design process, special fixture of milling three and inclined boreholes were comprehensive design. From the dimension design of fixture to the two side pin constrained degrees of freedom positioning scheme to the calculation of machining surface precision: the design of hydraulic feed system, this paper also use a lot of space. Key according to the basic principle of hydraulic system, draw the diagram of hydraulic system reasonable; according to the main parameters of hydraulic component has been selected, combined with the specific practice and experience in the design process in the design of the modular machine tool, describes the general parts (such as hydraulic slider) selection and special parts (such as the design and c