无功补偿放大器测试台概述.doc

 PAGE \* MERGEFORMAT 26 南京信息职业技术学院 毕业设计(论文)说明书 作者 马海威 学号 10911P30 系部 电子信息学院 专业 电子信息工程技术 题目 无功补偿控制器测试台 指导教师 邹传琴 评阅教师 完成时间： 2012 年 5月 10日 毕业设计(论文)中文摘要 无功补偿控制器测试台 摘要：本文主要讲述了无功补偿控制器（以下简称综合模块）新的调试板，它是根据传统测试台所带来的不便所设计的。传统测试台是由三相程控测试仪、计算机还有简易测试台组成，调试要在两个测试台上才能完成。根据测试的不便所设计的新测试板，它是通过具有双通道功能的单片机跟计算机、产品相连。可以实现在一个测试台完成测试。新的测试板开关采用复合开关，投切是采用过零投切。 关键词：  HYPERLINK /it-waibao/termCommentate/100_124_14152.html 调试；复合开关；过零投切  毕业设计(论文)外文摘要 Title : the reactive power compensation controller Abstract: This paper describes a new debug console of the reactive power compensation controller (hereinafter referred to it as an integrated module), which is designed as the result of the inconvenience of traditional test console. Traditional test bed consists of three parts, a three-phase programmable tester, a computer and a simple test console. Debugging stage will be completed in two test consoles. According to test inconvenience we designed the new test console, which has dual-channel functionality through Single Chip Micyoco that combine the computer with the production. We can use this single test console to complete the testing! And just as what you will see, composite switch and zero-crossing switching will be adopted in the new debug console.。 Keywords: Debugging; composite switch; zero switching  目录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc325053035 1 引言  PAGEREF _Toc325053035 \h 6  HYPERLINK \l _Toc325053036 2 调试概述  PAGEREF _Toc325053036 \h 7  HYPERLINK \l _Toc325053037 3 综合模块调试台  PAGEREF _Toc325053037 \h 7  HYPERLINK \l _Toc325053038 4 调试板的硬件设计  PAGEREF _Toc325053038 \h 9  HYPERLINK \l _Toc325053039 4.1 设计原理  PAGEREF _Toc325053039 \h 9  HYPERLINK \l _Toc32