PLC 电镀流水线.docVIP

摘 要 电镀生产线自动化结合其他行业自动控制技术的应用情况，提出了基于PLC的电镀行车自动生产线的设计，并通过应用机械、可编程序控制器(PLC)等多项专门技术开发的自动生产系统。本文首先分析和制定了该生产线的整体设计思想和方案。为了确保了该生产线系统具备真正的自动化生产能力且结构简单，本文采用可编程序控制器对某电镀行车的工作过程进行控制的方法，简化了控制系统的接线，克服了电磁继电器动作时间长、触点抖动的缺点，提高了系统的可靠性和灵活性。 本文以镀镍电镀自动生产线控制系统设计为研究对象，利用可编程序控制器实现对电镀生产线的系统的顺序控制，使用理论研究的方法，设计了一套基于可编程控制器的电镀车间专用行车自动控制系统。本文采用S7-300型号的PLC来进行控制，使系统具有很强的适应能力，可方便完成自动，手动拉制和相互之间的切换；整个程序采用结构化的设计方法，具有调试方便，维护简单，移植性好的优点。为适应现代传统的工业控制系统，我们还采用了基于力控组态软件的系统作为上位机，配合下位机PLC完成了系统的监控功能 ，更好的来实现控制系统的功能。 关键词：电镀行车，可编程控制器，顺序控制，组态软件 Abstract Application of electroplating production line automatic automatic control technology in combination with other industries, made plated vehicular line design based on PLC and by applying mechanical, programmable logic controllers (PLC), a number of specialized technology to develop automated production system. This paper first analyses and developed the overall design of the production line and the programme. In order to ensure that the production system with real automation production capacity and the structure is simple, the paper of using programmable logic controller in an electroplating process control methods simplifies the control system wiring, to overcome the electromagnetic relay disadvantages of long hours, contact jitter, improved system reliability and flexibility. Design of control system of automatic production line of nickel plating, this paper studies, electroplating production line by using programmable logic controller system for sequence control, using the method of theoretical research, devised a plating plant based on PLC automatic control system of dedicated traffic lanes. PLC for control of the S7-300 model used in this paper, the system has a strong ability to adapt, can be easily completed automatically, manually drawn and switch between each other throughout the program uses a structured design methodology, debugging, maintenance, advantages of Xenografts. To adapt to the modern tradition of industrial control systems, we have a