扩散硅压力芯片介绍.doc

扩散硅压力传感器 Solid State Pressure Sensor 特性 FEATURES ·成本低 Low Cost Sensor Element ·稳定性高 Solid State Reliability ·绝压 Absolute Pressure ·恒压源或恒流源 Constant Voltage or Constant Current Drive 应用 APPLICATIONS ·高度计 Altimeters ·天气预报计 Weather Station ·胎压计 Pneumatic Control ·工业自动控制 Industrial Autocontrol 指标 CHARACTERISTICS 以下数据在直流5V供电 25℃条件下测量 否则数据不符 Supply Voltage 5VDC Ambient Temperature 25℃ Unless Otherwise Specified 项目Item 最小值Min 标准值Type 最大值Max 单位Units 供电电压 Excitation Voltage 0 5.0 10.0 Volts 供电电流 Excitation Current 0 1.5 3.0 mA 量程范围 Span FS Range 5 psi 15 psi 60 psi 100 psi 150psi 300psi 60 60 60 60 60 60 100 100 100 100 100 100 120 120 120 120 120 mV mV mV mV mV mV 零点输出 Offset -50 0 50 mV 温度系数 TC Span -27 -22 -17 %FS/100℃ 零点温度系数 TC Offset -7 +7 %FS/100℃ 阻抗温度系数TC Resistance 23 28 33 %FS/100℃ 线性度 Linearity -0.3 +0.1 +0.3 %F.S 桥臂电阻 Bridge Impedance 2.7 3.3 4.0 KΩ 过载能力 Pressure Overload 2× Pressure Rated.F.S. 工作温度 Operating Temp. -20 85 ℃ 贮藏温度 Storage Temp. -30 125 ℃ 接线图CONNECTION 1 +5V 2 Vout+ 3 GND 4 Vout- 说明DESCRIPTION YX系列TO封装扩散硅压力传感器可直接焊在电路板上，广泛应用于OEM产品和无腐蚀环境。量程范围可做到5psi到300psi。也可封装成其他形式使其性能指标和测量范围更宽。如需更多详细资料，请与厂家联系。 The YX Series of pressure sensors are silicon micromachined, piezoresistive sensor in TO-5 metal can package that is suitable for printed circuit mounting. They were designed for extremely cost sensitive applications where the sensing element is to be integral to the OEM equipment, and are intended for use with non-corrosive, non-ionic media. These devices are available in full-scale ranges from 5 to 300 psi. They also may be packaged with application specific sensor die so that the performance characteristics and output range also can be identified. For further information on this series, please contact factory. 备注Notes: 最佳直线拟合法。Best fit straight line. 在-10℃到40℃之间温度系数为典型值。Between -10℃ and 40℃ Temperature coefficients are typical values. 欢迎来电洽购我司产品或索取免费详细资料、设计选型指南和光盘 、样品；产品繁多未能尽录，欢迎来电查询。 中国传感器科技信息网：HTTP：//WWW.