YA-32 100T液压机液压系统及其本体设计.docVIP

PAGE YA-32 100T液压机液压系统及其本体设计THE HYDRAULIC SYSTEM AND THE ONTOLOGY DESIGN OF HYDRAULIC YA-32 100T学生姓名学院名称机电学院专业名称机械设计制造及其自动化指导教师通过对分析液压机的国内外生产及研究现状，确定了本课题的主要设计内容。在确定了液压机初步设计方案后，采用了传统设计方法对100T液压机机身结构进行设计计算及强度校核，并采用AutoCAD设计软件对上横梁、底座、拉伸滑块、压边滑块、拉伸缸、压边缸、顶出缸、立柱及总装图进行了工程绘图，在参考了某公司生产的三梁四柱式液压机液压系统以及查阅了有关关于液压系统设计的书籍后，设计了液压系统的工作说明书，并对其进行了可行性分析，最后对整个设计进行系统分析，得出整个设计切实可行。关键词：液压机；机身结构AbstractThrough to analysed the type hydraulic press domestic and foreign research present situation, I had determined this topic main design content. After I had determined the type hydraulic press preliminary design plan, used the traditional theory method to carry on the design, the computation, the intensity examination to the body of 100T hydraulic presses fuselages structure, used AutoCAD design software to the main traverse, under the crossbeam, moves Liang, the master cylinder, goes against the cylinder, the column, the final assembly drawing had carried on the project cartography, meanwhile had carried on the mapping to the master cylinder; After referred to three Liang four columns hydraulic Type hydraulic press of wall hydraulic system which some company produces as well as has consulted massively and the hydraulic system design books, had produced the system of numberal control working instructions, and had carried on the feasibility analysis to it, finally carried on the system analysis to the entire design, obtained the entire design to be practical and feasible.keywords：Hydraulc press Body structure 目 录1绪论1 TOC \o 1-2 \u keywords：Hydraulc press Body structure 账吹粘巨鸥栝漓堡词逵芾瀵 PAGEREF _Toc256000000 \h 21 绪论狙冬榷壹咖仓鸦嘶六座籴于 PAGEREF _Toc256000001 \h 01.1液压机的发展踢锦式嵘膊轫憷浍缔蟪坞蚪 PAGEREF _Toc256000002 \h 0由于液压机的液压系统和整机结构方面，已经比较成熟，国内外液压机的发展主要体现在控制系统方面。微电子技术的飞速发展，为改进液压机的性能、提高稳定性、加工效率等方面提供了可能。相比来讲，国内机型虽种类齐全，但技术含量相对较低，缺乏技术含量高的高档机型，这与机电液一体化，中小批量柔性生产的发展趋势不相适应。 　　在国内外液压机产品中，按照控制系统，液压机可分为三种类型：一种是以继电器为主控元件的传统型液压机；一种是采用可编程控制器控制的液压机；第三种是应用高级微处理器（或工业控制计算机）的高性能液压机。三种类型功能各有异，应用范围也不尽相同。但总的发展趋势是高速化、智能化。 　　继电器控