超声波距离显示报警ISD1820语言播报系.docVIP

超声波距离显示ISD1820语音报警系统 Ultrasonic Distance Display ISD1820 Voice Alarm System 产品概述： ICStation team introduce you this Ultrasonic Distance Display ISD1820 Voice Alarm System based on ICStation UNO. This system works under 5V power supply, uses the Ultrasonic Module HC-SR04 Distance Transducer Sensor to detect the distance between the Module and the measured object. When the Ultrasonic Module detects the distance is larger than the maximum, the loudspeaker will not alarm. When the Ultrasonic Module detects the distance is smaller than the maximum, the loudspeaker will alarm. The distance data will be displayed on the LCD1602. This system can be made easily with low cost and it is suitable for automobile and Workshop and so on. 超声波距离显示语音报警系统采用DC5V电压工作，通过超声波模块检测与被测物体之间的距离，当超声波模块检测到的距离大于设定的上限距离，扬声器不报警。当超声波模块检测到的距离小于设定的上限距离，扬声器报警。是一个制作简单、成本低廉的超声波距离显示语音报警系统。适用于汽车，车间等地方。 产品功能： Functions; 开机硬件初始化时，1602液晶显示模块显示设定好的界面。 1)When start up, the hardware initializes, the LCD1602 displays the interface we set before. 2）当超声波模块检测到的距离大于设定的上限距离，扬声器不报警。 2)When the Ultrasonic Module detects that the distance is larger than the maximum, the loudspeaker does not alarm. 3）当超声波模块检测到的距离小于设定的上限距离，扬声器报警。 3)When the Ultrasonic detects the distance is smaller than the maximum, the loudspeaker alarms. 4）通过ISD1820语音板声音录制模块可以更改报警语音内容。 4)Use the ISD1802 Voice Module to change the alarm voice content. 5）LCD1602液晶显示屏实时显示超声波模块与被测物体距离。 5)Use the LCD1602 to display the distance between the Ultrasonic Module and measured object. 物料清单：Component lists: icstation UNO（Item ID3516 含下载线一根） 1套 1.1×ICStation ATMEGA328 UNO V3.0 R3 Board Compatible Arduino UNO R3 /product_info.php?products_id=3516 2)面包板(Item ID:1450) 1个 2.1×830 Point Solderless PCB Bread Board MB-102 Test DIY /product_info.php?products_id=1450 3)面包线(Item ID:1437) 18根 3.18×Breadboard Plug Wire Cable Tire /product_info.php?products_id=1437 4)+5V直流电源