FE 531-2-7油漆包装.docVIP

SPECIFICATION OF MANUFACTURE ANTI-CORROSIVE COAT OF PAINT INTERIOR SURFACES OF THE EQUIPMENT OF THE WATER STEAM CIRCUIT OF THE FOSSIL AND NUCLEAR POWER STATION 制造标准 化石燃料发电站与核电站的水蒸气循环设备的内壁防蚀涂层 1 OBJECT AND SCOPE OF APPLICATION 本标准的适用范围及对象 Anti-corrosion coating by painting of interior surfaces of the equipment under pressure of the circuit water /stream functioning at a temperature 300 ℃ located in the turbine hall of the fossil or nuclear power stations. 本标准适用于运行温度小于300℃的化石燃料发电站以及核电站的涡流室水循环设备内壁的防蚀涂料. 2 REFERENCE DOCUMENTS 参考文件 NF EN 12944 parts 1 to 8 NF EN 12944第一至第八部分 3 CODING OF THE SYSTEM OF COATING 涂层系统编码 Family NFT 36005 NFT 36005标准系 Classify durability NF EN ISO 12944-1 分类持久性NF EN ISO 12944-1 Average 平均值 Category of corrosivity 腐蚀性种类 Not standardized type F ALSTOM ALSTOM非标准F型 4 DATA SHEET Model according to FE 530-0 一览表 模版依据FE530-0 Number of layer 层数 1 Total thickness (ECM) μm 总厚度(单位: μm) 20 Colour AFNOR or RAL AFNOR或者RAL的颜色 According to P.O. Specification 按照P.O.标准执行 5 QUALIFICATION OF THE PRODUCTS USE AND CONTROLS ASSOCIATE 产品用途及相关控制资格 5.a) – chemical Analysis C.f data sheet 5.a) – C.f一览表的化学分析 Proportioning while binding, solvents and pulverulent matters 配比时的粘合,溶解和粉块问题 Specific proportionings: epoxy index, index of amine, phthalic anhydride rate. 特性比例:环氧指数,胺指数,酞酐率 Limiting contents chlorinates some, fluorine and other halogens and sulphur. 氯化物,氟及其他卤素,硫磺 5.b)- Tests of evaluation of performances in laboratory 5.b)- 实验室内的性能评估测试 5.b) 1-Aptitude for conservation of painting 5.b) 1-涂层保存性 Test of sedimentation according to NF T 34550 Appendix A. 沉降试验依照NF T 34550附录A执行 5.b)2-Evaluation and criteria of acceptance before tests of performance 5.b)2-性能试验前的合格标准及评估. Adherence according to NF EN ISO 4624 粘着依据NF EN ISO 4624执行 ≥2Mpa Squaring according to NF EN ISO 2409 if ECM 250μm 如果ECM 250μm.方形化依据NF EN ISO 2409执行 Classify 0 or 1 分类0或1 5.b) 3-Tests of ageing (performance)5.b) 3-性能的老化试验 Resistance to the salt spray according to