16位抢答器设——毕业设计论文.docVIP

  • 25
  • 0
  • 约1.35万字
  • 约 22页
  • 2016-08-16 发布于贵州
  • 举报
16位抢答器设——毕业设计论文

内 容 摘 要 本十六路抢答器由主体电路与扩展电路组成。优先编码电路、锁存器、译码电路将参赛队的输入信号在显示器上输出;用控制电路和主持人开关启动报警电路,以上两部分组成主体电路。通过定时电路和译码电路将秒脉冲产生的信号在显示器上输出实现计时功能,构成扩展电路。经过布线、焊接、调试等工作后抢答器成形。抢答电路 定时电路 报警电路 时序控制Summary T he figure vies for the answering device by the subject circuit and expands the circuit to make up . Have priority in code circuit , latch , decipher circuit and export the input signal of the entrant team on the display; Starting the warning circuit with the control circuit and hosts switch, two the above-mentioned parts make up the subject circuit. Through timing circuit and decipher second signal funct

文档评论(0)

1亿VIP精品文档

相关文档