积屑瘤.docVIP

摘要：在精切削加工时，为什么采用极低或高速切削时工件表面粗糙度低？为什么采用润滑性能好的切削液、刀具前角大、进给量和刀具主偏角小工件表面粗糙度低？为什么工件材料硬度高、脆性大的材料，在切削时粗糙度低？怎么保证加工质量，值得深思。本文论述了在切削塑性材料过程中一种常见的物理、力学作用下，积屑瘤的生长条件，消失、防止措施，及对精加工表面粗糙度产生的影响显示对应的拉丁字符的拼音 字典 In precision machining, why use a very low or high-speed cutting of low surface roughness? Why use lubrication cutting fluid, a large rake angle, feed rate and tool surface roughness of the primary angle of small low? Why work-piece material hardness, brittleness of the material, the low roughness during cutting? How to ensure processing quality, it is worth considering. This article discusses the process