ND660 圆柱固持胶.docVIP

ND660 亲爱的稳固伙伴： 在大多数的工业生产设备中都会有圆柱组件，如轴承与轴、皮带轮与轴、齿轮与轴、轴承与座孔、衬套与孔等孔轴组合配件Dear ND partners: In most of the industrial production equipment will have a cylindrical component, such as bearings and shaft, pulley and shaft, gear and shaft, bearing and hole, bushing hole shaft combined with hole and other accessories, then component assembly is good or not is closely related to the use of equipment performance and the production of the enterprise. 传统装配方式的特点： 以前无一例外的采用热套、冷压等尺寸过盈方法再装配，再辅以键和销子等。这种固定方法加工精度要求严格，而且因热膨胀系数不同，产生磨损和腐蚀，很容易产生松动。使用可填满配合间隙，固化后牢固耐久，稳定可靠。以厌氧胶固持的方法使加工精度要求降低、装配操作简便、生产效率提高、节省能耗和加工费用。 The characteristics of the traditional way of assembly: Used with no exception of use the size interference methods such as heat, cold press and assembly, along with the keys and pins, etc. This method of fixed processing precision demanding, and because of the different thermal expansion coefficient, wear and corrosion, it is easy to loose. The characteristics of the current advanced assembly way: Using a cylindrical solid fill a gum can fit clearance, after curing is firm and durable, stable and reliable. With anaerobic adhesive hold lower the processing accuracy, assembly is easy to operate, improve production efficiency, save energy consumption and processing costs. 本周我们隆重向大家推荐一款圆柱固持胶——ND660 This week we recommend ceremoniously held a retaining compound - ND660 产品说明： ND660 是一种高粘度，通用型，厌氧圆柱固持胶，适用于填充装配间隙，增强滑动配合及修复磨损。此产品可用于铝、钢、不锈钢、镀锌及特殊合金部件。ND660 在耐温性及耐溶剂性上表现良好。本品适用于所有需要密封及需要增加装配强度的圆柱型金属零件。 Product Description ND660 is a high viscosity, general purpose, anaerobic retaining compound used for press-fit and tight-clearance, and slip-fit metal applications. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. ND660 exhibits good temperature and solvent resistant. ND660 can be used where lubricity is needed to press fit parts or to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces. 典型应用： ND660的典型应