NewISOstandards.ppt

New ISO standards Christfried Pumm Wenzel Pr?zision ia.cmm International Conference Sinsheim (Germany), April 28th, 2005 “Specifications” WG The working group “Specifications” is one of several sub-groups of ia.cmm. The performance specifications for CMMs are defined by the ISO 10360 series. Based on ISO 10360-1, the “Specifications” WG e.g. created a structure for a common data sheet within all associated companies. This was completed succesfully during the last two years. Future work will concentrate on informing ia.cmm-members and customers on new standards and revisions related to CMM-technologies. Actually this task refers to: ISO 10360-2 CMMs used for measuring linear dimensions ISO 10360-5 CMM probing performance with contacting probing systems ISO/TS 23165 Guide to evaluation of CMM test uncertainty ISO 10360 Overview New ISO 10360-2 Technologies applicable to coordinate measurement in field have been rapidly evolved during the last years requiring better clarified CMM specifications as well as enhancements of the proven standards. Main topics discussed by ISO/TC213/WG10 during the last meeting in New Orleans are: Enhanced and clarified test procedures Test to verify probing error was moved from ISO 10360-2 to ISO 10360-5 Test to verify MPEE is now called “E0-test” instead of “E-test” Thermal properties of test length Thermal performance of artefacts used for CMM-tests is specified; CTE as well as the uncertainty of CTE is now to be declared. Standard tests must use test lengths with a CTE between 8 x 10-6/K and 13 x 10-6/K as default! Specification statements based on test lengths with non-corresponding CTE’s must be indicated (MPE*E0) and an additional E0-test must be done on a “normal” test length! New ISO 10360-2 Improving test sensitivity to ram axis roll A new EL-test has been introduced with test sensitivity to ram axis roll proportional to the offset distance between the centerline of the ram axis and the center of the styl