HEIDENHAIN五坐标编程CHAP13.docVIP

Heidenhain Conversational Programming Pattern cycles The TNC offers 2 cycles for machining hole patterns. Cycle Softkey 220 - Circular Pattern. 221 - Linear Pattern. You can combine Cycle 220 and Cycle 221 with the following fixed cycles: Cycle 1 Pecking Cycle 2 Tapping Cycle 3 Slot Milling Cycle 4 Pocket Milling Cycle 5 Circular Pocket Milling Cycle 17 Rigid Tapping Cycle 200 Drilling Cycle 201 Reaming Cycle 202 Boring Cycle 203 Universal Drilling Cycle 212 Pocket Finishing Cycle 213 Stud Finishing Cycle 214 Circular Pocket Finishing Cycle 215 Circular Stud Finishing Circular Pattern (Cycle 220) 1) At rapid traverse, the TNC positions the tool from its current position to the starting point for the first machining operation. The tool is positioned in the following sequence: a) Move to 2ND SET-UP CLEARANCE b) Approach starting point in the working plane. c) Move to SET-UP CLEARANCE above the workpiece surface. 2) From this position the TNC executes the last defined fixed cycle. 3) The tool then approaches the starting point for the next machining operation on a straight line at SET-UP CLEARANCE (or 2ND SET-UP CLEARANCE). 4) The process (1 - 3) is repeated until all maching operations have been executed. NOTE: Cycle 220 is DEF active, which means that it automatically calls the last defined fixed cycle. If Cycle220 is combined with one of the fixed cycles 200 - 215, the SET-UP CLEARANCE, workpiece surface and 2ND SET-UP CLEARANCE that you defined in Cycle 220 will be effective for the selected fixed cycle. CENTRE IN 1ST AXIS Q216 (Absolute) - Centre of the Pitch Circle in the main axis of the working plane. CENTRE IN 2ND AXIS Q217 - (Absolute) Centre of the Pitch Circle in the secondary axis of the working plane. PITCH CIRCLE DIAMETER Q244 - Diameter of the PCD. STARTING ANGLE Q245 - (Absolute Polar) Angle between the main axis of the working plane and the starting point for the first machining operation on the PCD. STOPPING ANGLE Q246 (Absolute Polar) - Angle be