基于FPGA的DDS波形发生器的设计论文辩析.doc

摘 要 Verilog-HDL硬件描述语言设计DDS波形发生器的各个模块，最后利用Altera的设计工具Quartus II并结合Modelsim软件对波形发生器进行电路设计功能仿真，并对仿真结果进行分析。仿真结果表明，波形发生器可输出正弦波、三角波、方波、锯齿波，并且可通过改变频率控制字和相位控制字的大小来改变输出波形的频率和相位。通过仿真结果表明，本设计达到了预定的要求，并证明了采用软硬件结合，利用FPGA技术实现DDS波形发生器的方法是可行的。 关键词 Abstract Waveform generator has become a modern field test one of the most widely used general-purpose equipment, on behalf of the waveform generator development. With the development of technology in all aspects of the waveform generators have become increasingly demanding. In recent years, direct digital synthesizers (DDS) has a frequency resolution bec