LK-80电子计米器.docVIP

型号：LK-80测长传感器 结构、工作原理及用途: LK系列测长传感器，由测长传动轮、测长信号接收和信号输入电路构成，传动轮通过与被测物（如纺织品、塑胶带）的反向摩擦滚动，或与被测物生产主机的主轴的反向滚动，通过传感器内部的齿轮比和电信号相结合，将所测的实际长度单位信号输出给计数器（计长仪），由计数器（计长仪）记录其累计长度。 本系列产品与计数器或计长仪配合，广泛适用于印刷机械、包装机械、纺织机械、塑料橡胶机械、电线电缆设备、制药机械以及所有生产过程中需要自动检测产品长度的场合。 使用注意： 固定位置并无限制，但转轮旋转方向需与待测物前时方向平行。 待测物接触面尽量避免有机溶剂、油、水或高温。 激烈震动之场所，除造成计数误差外，也易造成机械损坏。 伸缩性大的材料，注意接触面的压著力。 由于原点不确定，电源投入后，第一个输出信号长度误差介于0.30与50%之间。 精度误差正负一个计长单位。 LK80测长传感器 测长传感器 电子计米器 计米轮 浙江东计电气有限公司 销售经理 0577欢迎前来咨询 Model: LK-80 length measurement sensor Structure, working principle and use: ????LK series length measurement sensors, by measuring a long drive wheel length measuring signal reception and signal input circuits, drive wheel with the measured object (such as textiles, plastic belt) of the reverse rolling friction, or with the production host EUT Spindle reverse scroll through the sensor inside the gear ratio and signal combining to reflect on the actual length of the unit of measurement signal output to the counter (total length instrument), from the counter (total length instrument) recorded a cumulative length. ?????This series of products with the counter or provided with a long instrument, widely used in printing machinery, packaging machinery, textile machinery, plastics and rubber machinery, wire and cable equipment, pharmaceutical machinery, and all of the production process needs to automatically detect the product length of the occasion. Use Note: 1. Fixed position, and unlimited, but the direction of wheel rotation when needed with the analytes before the parallel to the direction. 2. Analytes contact surface to avoid organic solvents, oil, water or heat. 3. Intense vibration of the premises, in addition to errors caused by counting, but also could easily lead to mechanical damage. 4. Scalability great material, pay attention to efforts to contact surface pressure. 5. As the origin of uncertainty, power input, the first output signal length error between